These pumps are designed to be used out of water. All pumps in this category are electric. They require inlet and outlet pipe and require priming initially.
ENM pumps are self-priming and have bronze bodies and single impellers. They have 316 stainless steel shafts, fitted with carbon ceramic and NBR mechanical seals. (Viton® is available at extra cost).
The IP44 motors have a forward and reverse switch for filling and emptying duties. They are also available in 3 phase as ENT pumps. They are designed mainly for pumping clean liquids at temperatures up to a maximum of 90ºC, but can also handle very small soft solids, in suspension. Maximum recommended suction lift, with a foot valve, is 6 metres.
These are good, general-purpose, portable pumps for circulating and transfer of water, sea-water, juices, gas oil (“red diesel”), bio-fuel, transformer oil and mild chemicals. However, THEY MUST NOT PUMP DERV (“white diesel”), petrol, solvents or products with a low flash point. All models are supplied free-standing, so for ease of handling and added protection, a full frame is a worthy investment as an optional extra.
|Dry Weight (kg)||5.9||5.9||9||9||11.9||11.9||13.8||13.8||20.7||20.7||15.3||15.3||9||11.9||13.8||20.7||15.3|
|Packing Weight (kg)||6.40||6.40||9.50||9.50||12.50||12.50||14.70||14.70||24.30||24.30||15.80||15.80||9.50||12.50||14.70||24.30||15.80|
© 2015 The Flood Defence & Recovery Company