Product successfully added to your shopping cart

Quantity
Total

There are 0 items in your cart. There is 1 item in your cart.

Total products (VAT incl.)
Total shipping (VAT incl.) To be determined
VAT £0.00
Total (VAT incl.)
Continue shopping Proceed to checkout

170 L/min Submersible Puddle Sucker (LSC1.4S Manual 230V)

Delivery:
England/Wales: £18.00
Scotland: £30.00
Highlands: £42.00
including VAT

£514.80 VAT incl.

More info

170 L/min Submersible Puddle Sucker (LSC1.4S)

The LSC1.4S or “puddle sucker” is able to pump water down to 1mm, which makes it suitable for pumping large or small areas of nuisance water found on flat surfaces. It incorporates a dual position outlet port, to enable the user to position the outlet hose horizontally or vertically and avoid it kinking.

For durability, during robust handling, it has a pressed steel outer casing and a cast aluminium pump stand to offer increased protection of the steel and rubber base plate. A combination of a rubber pump chamber and a urethane vortex impeller enables the design to offer excellent wear resistance in site water applications that contain sand and silt in suspension, thus maintaining performance and
reliability. An additional feature is an integral swing check valve to prevent back flow of water from the discharge hose.

Quality is further enhanced with a 403 stainless steel shaft that is fitted with an ultra hardwearing double mechanical seal (inboard: silicon carbide-silicon carbide) – which runs in an oil chamber that has an oil lifter to maintain seal lubrication during operation in any position. This feature, combined with the water and air cooling route to the top outlet, allows the pump to operate for extended periods with little or no water. Used widely by hire outlets, utilities and flood control companies.

For precise water level control we recommend the use of the SwitcH2O. 3 probes, in 304 stainless steel, are set in an epoxy-resin filled holder and they represent on, off and common. The common must always be the lowest point of the probes, while the on and off can be cut to any size from 5mm to 50mm, from the base of the pump, but must have a minimum difference of between 3 and 5mm. The SwitcH2O should be used in conjunction with a QA50B control panel. It is supplied with 10 metres of low voltage, PVC power cable.

Optional extra

  • 50mm outlet available for the pumps. Please use the drop-down menu to choose the preferable model.

Specification - table format

Model LSC1.4S LSC1.4S LSC 1.4S (2") LSC 1.4S (2") LSC with H2O&Panel LSC with H2O&Panel LSC with H2O&Panel LSC with H2O&Panel
Manual or Auto Manual Manual Manual Manual Automatic Automatic Automatic Automatic
Outlet(mm) 25 25 50 50 25 25 50 50
kW 0.48 0.48 0.48 0.48 0.48 0.48 0.48 0.48
Flow (l/min) 170 170 170 170 170 170 170 170
Voltage 110V 230V 110V 230V 110V 230V 110V 230V
Head (Metres) 11 11 11 11 11 11 11 11
Free Passage (mm) 6 6 6 6 6 6 6 6
Height (mm) 316 316 316 316 316 316 316 316
Diameter (mm) 196 196 196 196 196 196 196 196
Dry Weight (kg) 12 12 12.1 12.1 12.1 12.1 12.2 12
Packing Weight (kg) 13.70 13.70 13.80 13.80 15.60 15.60 15.70 15.70

Specification - image format

LSC1.4S

Reviews

Write a review

170 L/min Submersible Puddle Sucker (LSC1.4S Manual 230V)

170 L/min Submersible Puddle Sucker (LSC1.4S Manual 230V)

© 2015 The Flood Defence & Recovery Company